Average sump pump lifespan — and pumps tend to fail during the very storm they are working hardest in. Plumbers recommend proactive replacement at that age.
Family HandymanWhen to Test Your Sump Pump in Mission, TX
SEASON PASSED182 days until spring thaw test (last 32°F)Jan 9
Two moments stress a Mission sump pump: the spring thaw near January 9 and the fall rainy season, so test before each with a five-gallon bucket in the pit. Cold deepens quickly here — only about 1 days separate the first frost from that hard freeze.
Jan 9Local deadline
Jan 9Spring anchor
54 days28°F window spread
0 inSnow per season
OUTLOOK
Typical first spring thaw test (last 32°F) near Jan 9; local deadline about Jan 9. The live 10-day outlook loads here.
Local freeze dates for Mission
| Threshold | Early (1-in-10) | Median | Late (9-in-10) |
|---|---|---|---|
| 32°F (light freeze) | Dec 8 | Jan 1 | Feb 4 |
| 28°F (hard freeze) | Dec 14 | Jan 2 | Feb 6 |
Bars span the early (1-in-10) to late (9-in-10) window for each freeze threshold; the dot marks the median year. The dashed line is the local prep deadline.
NOAA station: Mcallen · 4.9 mi away · 100 ft elevation.
- The first freeze comes early in Mission, so the clock is already running by late September.
- There's a 54-day swing between the early and late freeze dates, meaning the forecast beats the average in any given year.
For Mission, the nearest NOAA station with freeze data is Mcallen, 4.9 miles out at 100 feet. Median first-freeze dates there run 32°F by Jan 1, 28°F by Jan 2. That hard freeze has landed anywhere from Dec 14 to Feb 6, a swing of roughly 54 days. Spring's last 32°F freeze clears around Jan 9. Snowfall averages 0 inches a year.
The freeze arrives in two steps in Mission: 32°F around Jan 1, then a hard 28°F near Jan 2. That first freezing night has ranged from Dec 8 to Feb 4, roughly a 58-day spread. On the spring side, the last 32°F freeze clears around Jan 9 and as late as Feb 12 — the green light for reopening water and de-winterizing. With almost no snow in a normal year, cold — not plowing — sets the calendar, and it centers on Jan 9.
Your sump pump checklist
- Pour about five gallons of water into the pit slowly and watch the float rise, the pump start, and the water drop.Helpful gear: Water level alarm — Recommended pick
- Confirm the discharge line carries water 10–20 feet from the foundation and does not drain back into the pit.Helpful gear: Sump check valve — Recommended pick
- Clear the inlet screen and the pit of gravel and debris that can jam the float or the impeller.
- Check the check valve for a firm click; a failed valve lets discharged water fall back and short-cycle the pump.
- Add a battery backup pump so the system still runs when a storm knocks out the power.Helpful gear: Battery backup sump pump — Recommended pick
- Test the backup on battery power and note the install date; batteries usually need replacing every few years.
- If the primary pump is 7–10 years old, keep a replacement on the shelf before it fails mid-storm.Helpful gear: Replacement primary pump — Recommended pick
- Remember that flood insurance and most homeowner policies treat pump failure separately — read your coverage.
What to have on hand
As an Amazon Associate we may earn from qualifying purchases. Product picks are editorial; links do not change what you pay.
Battery backup sump pump
Second pump that runs when the power goes out mid-storm.
Recommended pickWater level alarm
Loud sensor that warns you before the pit overflows.
Recommended pickSump check valve
One-way valve that stops discharged water from draining back.
Recommended pickReplacement primary pump
A ready spare for a pump nearing the end of its life.
Recommended pickSump pump failure: the key numbers
Verified national benchmarks; sources open in a new tab (nofollow).
Damage a single inch of water in a home can cause, per FEMA — and standard homeowners policies exclude flood damage; sump failure usually needs a separate endorsement.
FEMA / FloodSmartThe bucket test: pour water slowly into the pit — the float should rise freely, the pump should kick on within seconds, empty the pit and shut off. Test at least twice a year.
Roto-RooterInstalled cost of a battery backup system — the storms that flood basements are the same ones that knock out power. Batteries need replacing every 3–5 years.
AngiWhat this means locally
Compared with nearby cities, Mission's first-freeze date near Jan 9 sits close to McAllen (Jan 9) and close to Pharr (Jan 9). Texas's deadlines span Jan 8 to Apr 15 statewide — one date for all of Texas would be off by weeks for Mission. Once you know Mission's freeze date, use it to protect your pipes too. Keeping an eye on the rest of the county? The same local math is on our Midland and Missouri City pages.
Other winter jobs in Mission
Every task below is dated to Mission's own freeze and snow normals.
Get the Sump Pump Test alert for your city
We will email you when local conditions cross the line. Double opt-in; unsubscribe anytime.
Frequently asked questions
How do I test my sump pump before heavy rain?
Pour about five gallons of water into the pit slowly and watch the float rise, the pump switch on, and the water level drop. Confirm the discharge carries water well away from the foundation. Doing this before the wet season, and again in spring near the last freeze around Jan 9, catches problems early.
How often should a sump pump run?
It varies with your water table and weather; some pumps cycle every few minutes during a storm and sit idle for weeks in dry spells. Frequent cycling with no rain can signal a stuck float, a failed check valve, or groundwater seeping in. Occasional running during wet weather is normal.
How long do sump pumps last?
A typical sump pump lasts about 7 to 10 years, though hard-working pumps wear out sooner. If yours is near that age, keep a replacement on hand so a mid-storm failure does not leave the pit unattended. Testing it seasonally tells you more than age alone.
Do I need a battery backup sump pump?
If your basement floods when the power goes out, yes — storms that overwhelm the pit are exactly when the grid tends to fail. A battery backup runs the pump through an outage, which is the single most common cause of a wet basement during heavy weather. Test the backup on battery power, too.
Does insurance cover sump pump failure?
Standard homeowner policies and federal flood insurance often exclude damage from a sump pump that fails or is overwhelmed. A separate water-backup or sump-failure rider may be available. Read your policy before a storm, because assumptions about coverage are a common and costly surprise.
Why is my sump pump running with no rain?
A high water table, snowmelt, or groundwater seepage can keep the pit filling even in dry weather. A pump that runs constantly may also have a stuck float switch or a check valve that lets discharged water fall back into the pit. Check the float and the valve first.
How often should I test my sump pump?
At least twice a year — before spring thaw and before fall storm season — and monthly during heavy-use months if the basement is finished. Pour a 5-gallon bucket of water slowly into the pit and confirm the pump starts within seconds, empties the pit, and shuts off on its own. Idle float switches commonly stick against the pit wall, and a water test is the only way to catch that early.
Sump Pump Test: related searches
Searches this guide answers: how to test a sump pump, sump pump battery backup cost, float switch stuck, and basement flooding during spring thaw.
how to test a sump pumpsump pump lifespansump pump replacement costsump pump battery backupfloat switch stucksump pump check valvefrozen discharge linebasement flooding spring thawsump pit cleaningwater-powered backup pumpsump pump alarmbasement waterproofing cost
Data: NOAA 1991–2020 normals via Mcallen, live outlook by Open-Meteo. Sources · Methodology. Last updated: July 25, 2026.