FrostList

When to Winterize Your Boat in Moline, IL

ON TRACK112 days until first 28°F freezeOct 31

The first 28°F freeze near Moline averages October 31 (1991–2020 normals) — enough to crack an unprotected block even where owners assume they're safe — so winterize the boat by October 24. Plan for the early end: the one-in-ten date lands about 13 days before the median.

OUTLOOK

Typical first first 28°F freeze near Oct 31; local deadline about Oct 24. The live 10-day outlook loads here.

Local freeze dates for Moline

ThresholdEarly (1-in-10)MedianLate (9-in-10)
32°F (light freeze)Oct 7Oct 22Nov 2
28°F (hard freeze)Oct 18Oct 31Nov 14
24°F (severe)Oct 28Nov 9Nov 24

NOAA station: Rock Island L&D 15 · 2.7 mi away · 568 ft elevation.

Numbers for Moline come from Rock Island L&D 15, 2.7 miles away at 568 feet, where the medians fall 32°F by Oct 22, 28°F by Oct 31, 24°F by Nov 9. Year to year the 28°F date has ranged from Oct 18 to Nov 14 — about 27 days apart. Spring's last 32°F freeze clears around Apr 19. Snowfall averages 36 inches a year, first reaching an inch near November.

Expect the first frost near Oct 22 in Moline and the first hard freeze by about Oct 31. That first freezing night has ranged from Oct 7 to Nov 2, roughly a 26-day spread. On the spring side, the last 32°F freeze clears around Apr 19 and as late as May 4 — the green light for reopening water and de-winterizing. With around 36 inches of snow annually, plan for a handful of plowable storms each winter.

Your boat checklist

  1. Change the engine oil and filter while the motor is warm so contaminants leave with the old oil.
  2. Run the engine on antifreeze until pink fluid reaches the outlet, protecting the block and manifolds.
    Helpful gear: Marine antifreeze — Recommended pick
  3. Fog the cylinders with fogging oil as the engine runs down to coat internal parts against corrosion.
    Helpful gear: Fogging oil — Recommended pick
  4. Top off the fuel tank and add stabilizer to limit condensation and protect ethanol-blend fuel.
    Helpful gear: Marine fuel stabilizer — Recommended pick
  5. Drain the raw-water system, the livewell, and any washdown lines that can trap water.
  6. Remove the battery, charge it fully, and keep it on a maintainer over the layup.
    Helpful gear: Battery maintainer — Recommended pick
  7. Support the cover so snow and rain shed off, and leave vents so the interior can breathe.
  8. For an inboard or sterndrive, follow the manual closely — those blocks are the ones freeze claims hit hardest.

What to have on hand

Marine antifreeze
Propylene-glycol fluid rated for engine blocks and systems.
Recommended pick
Marine fuel stabilizer
Additive that protects ethanol-blend fuel over the layup.
Recommended pick
Fogging oil
Spray that coats cylinders against corrosion in storage.
Recommended pick
Battery maintainer
Keeps the cranking battery topped off on the trailer.
Recommended pick

What this means locally

Compared with nearby cities, Moline's first-freeze date near Oct 31 sits close to Rock Island (Oct 31) and close to Davenport (Oct 31). Illinois's deadlines span Oct 17 to Nov 8 statewide — one date for all of Illinois would be off by weeks for Moline. Once you know Moline's freeze date, use it to winterize an RV and store a motorcycle too.

Other winter jobs in Moline

Every task below is dated to Moline's own freeze and snow normals.

Sprinklers → Oct 21Frozen pipes → Oct 7Ice dams → Oct 16Car battery → Oct 31Snow blower → Oct 25Sump pump → Apr 19RV → Oct 21Motorcycle → Oct 22

See the full Moline winter checklist, in order →

Frequently asked questions

At what temperature does a boat engine block crack?
Trapped water in an engine block or manifold can freeze and crack the casting once temperatures fall below 32°F and stay there long enough. Inboard and sterndrive blocks hold the most water and are the most vulnerable. Draining fully and adding antifreeze before the first hard freeze near Oct 31 is the protection.
Do outboards need winterizing?
Yes. An outboard should be drained so no water sits in the powerhead or lower unit, and the fuel system stabilized. Outboards self-drain better than inboards when tilted down, but fogging the cylinders and changing the gear oil are still part of a proper layup.
Fogging oil: is it necessary?
Fogging coats the cylinder walls and internal parts with a film that resists corrosion during months of storage. On engines that sit all winter it is cheap insurance against rust, especially in humid or coastal storage. Follow your engine maker's guidance on how to apply it.
How much does boat winterization cost?
A professional winterization varies with engine type and boat size, and inboards cost more than a simple outboard. Doing it yourself costs mainly antifreeze, oil, and fogging oil. Either way, the bill is far smaller than repairing a cracked block, which is the failure winterizing prevents.
Do boats in IL really need winterizing?
If temperatures reach freezing where the boat is stored, yes. Freeze claims are common in milder states precisely because owners assume they are safe and skip the step, then a rare cold snap cracks a block. Check the local freeze dates above and protect the engine before the first hard freeze.
When should I de-winterize my boat?
De-winterize in spring once the risk of a hard freeze has passed for your area. Reconnect and charge the battery, replace drain plugs, check hoses and clamps, and inspect the fuel system before the first launch. Reopening too early leaves the block exposed to a late cold snap.

Data: NOAA 1991–2020 normals via Rock Island L&D 15, live outlook by Open-Meteo. Sources · Methodology. Last updated: July 11, 2026.