FrostList

When to Winterize Your Boat in Beverly, MA

ON TRACK113 days until first 28°F freezeNov 1

The first 28°F freeze near Beverly averages November 1 (1991–2020 normals) — enough to crack an unprotected block even where owners assume they're safe — so winterize the boat by October 25. It's a short step from frost to a hard freeze: roughly 15 days on average.

OUTLOOK

Typical first first 28°F freeze near Nov 1; local deadline about Oct 25. The live 10-day outlook loads here.

Local freeze dates for Beverly

ThresholdEarly (1-in-10)MedianLate (9-in-10)
32°F (light freeze)Oct 3Oct 17Nov 2
28°F (hard freeze)Oct 16Nov 1Nov 15
24°F (severe)Oct 29Nov 12Nov 30

NOAA station: Beverly Muni AP · 2.6 mi away · 108 ft elevation.

Beverly draws its numbers from Beverly Muni AP, 108 feet up and 2.6 miles away. Its median first-freeze dates are 32°F by Oct 17, 28°F by Nov 1, 24°F by Nov 12. Year to year the 28°F date has ranged from Oct 16 to Nov 15 — about 30 days apart. Spring's last 32°F freeze clears around Apr 24. Snowfall averages 51 inches a year, first reaching an inch near December.

Beverly usually sees its first 32°F night about Oct 17, with the first 28°F hard freeze close behind near Nov 1. Year to year, the first 32°F night has fallen anywhere from Oct 3 to Nov 2 — about 30 days apart. Spring's final freeze lands near Apr 24 and as late as May 6, so that is when outdoor water and stored gear can safely come back online. With about 51 inches of snow a year, roof, snow-blower, and ice-dam prep all belong on the same calendar.

Your boat checklist

  1. Change the engine oil and filter while the motor is warm so contaminants leave with the old oil.
  2. Run the engine on antifreeze until pink fluid reaches the outlet, protecting the block and manifolds.
    Helpful gear: Marine antifreezeRecommended pick
  3. Fog the cylinders with fogging oil as the engine runs down to coat internal parts against corrosion.
    Helpful gear: Fogging oilRecommended pick
  4. Top off the fuel tank and add stabilizer to limit condensation and protect ethanol-blend fuel.
    Helpful gear: Marine fuel stabilizerRecommended pick
  5. Drain the raw-water system, the livewell, and any washdown lines that can trap water.
  6. Remove the battery, charge it fully, and keep it on a maintainer over the layup.
    Helpful gear: Battery maintainerRecommended pick
  7. Support the cover so snow and rain shed off, and leave vents so the interior can breathe.
  8. For an inboard or sterndrive, follow the manual closely — those blocks are the ones freeze claims hit hardest.

What to have on hand

Marine antifreeze
Propylene-glycol fluid rated for engine blocks and systems.
Recommended pick
Marine fuel stabilizer
Additive that protects ethanol-blend fuel over the layup.
Recommended pick
Fogging oil
Spray that coats cylinders against corrosion in storage.
Recommended pick
Battery maintainer
Keeps the cranking battery topped off on the trailer.
Recommended pick

What this means locally

Against its neighbors, Beverly (first freeze Nov 1) runs close to Salem (Oct 31) and close to Peabody (Oct 31). Across Massachusetts, local prep deadlines in our data range from Oct 11 to Nov 14, so a statewide rule of thumb would miss Beverly by weeks. In Beverly, that same cold is your cue to winterize an RV and store a motorcycle.

Other winter jobs in Beverly

Every task below is dated to Beverly's own freeze and snow normals.

See the full Beverly winter checklist, in order →

Frequently asked questions

At what temperature does a boat engine block crack?
Trapped water in an engine block or manifold can freeze and crack the casting once temperatures fall below 32°F and stay there long enough. Inboard and sterndrive blocks hold the most water and are the most vulnerable. Draining fully and adding antifreeze before the first hard freeze near Nov 1 is the protection.
Do outboards need winterizing?
Yes. An outboard should be drained so no water sits in the powerhead or lower unit, and the fuel system stabilized. Outboards self-drain better than inboards when tilted down, but fogging the cylinders and changing the gear oil are still part of a proper layup.
Fogging oil: is it necessary?
Fogging coats the cylinder walls and internal parts with a film that resists corrosion during months of storage. On engines that sit all winter it is cheap insurance against rust, especially in humid or coastal storage. Follow your engine maker's guidance on how to apply it.
How much does boat winterization cost?
A professional winterization varies with engine type and boat size, and inboards cost more than a simple outboard. Doing it yourself costs mainly antifreeze, oil, and fogging oil. Either way, the bill is far smaller than repairing a cracked block, which is the failure winterizing prevents.
Do boats in MA really need winterizing?
If temperatures reach freezing where the boat is stored, yes. Freeze claims are common in milder states precisely because owners assume they are safe and skip the step, then a rare cold snap cracks a block. Check the local freeze dates above and protect the engine before the first hard freeze.
When should I de-winterize my boat?
De-winterize in spring once the risk of a hard freeze has passed for your area. Reconnect and charge the battery, replace drain plugs, check hoses and clamps, and inspect the fuel system before the first launch. Reopening too early leaves the block exposed to a late cold snap.

Data: NOAA 1991–2020 normals via Beverly Muni AP, live outlook by Open-Meteo. Sources · Methodology. Last updated: July 11, 2026.