FrostList

When to Winterize Your Boat in Baytown, TX

ON TRACK170 days until first 28°F freezeDec 28

The first 28°F freeze near Baytown averages December 28 (1991–2020 normals) — enough to crack an unprotected block even where owners assume they're safe — so winterize the boat by December 21. Year to year the date swings about 65 days, which is why the live outlook beats the calendar.

OUTLOOK

Typical first first 28°F freeze near Dec 28; local deadline about Dec 21. The live 10-day outlook loads here.

Local freeze dates for Baytown

ThresholdEarly (1-in-10)MedianLate (9-in-10)
32°F (light freeze)Nov 12Dec 4Jan 4
28°F (hard freeze)Nov 25Dec 28Jan 29
24°F (severe)Dec 9Jan 4Feb 2

NOAA station: Baytown · 12.4 mi away · 26 ft elevation.

For Baytown, the nearest NOAA station with freeze data is Baytown, 12.4 miles out at 26 feet. Median first-freeze dates there run 32°F by Dec 4, 28°F by Dec 28, 24°F by Jan 4. That hard freeze has landed anywhere from Nov 25 to Jan 29, a swing of roughly 65 days. Spring's last 32°F freeze clears around Feb 20.

In Baytown, freezing nights (32°F) typically begin around Dec 4 and the first hard freeze (28°F) follows near Dec 28. Year to year, the first 32°F night has fallen anywhere from Nov 12 to Jan 4 — about 53 days apart. Spring's final freeze lands near Feb 20 and as late as Mar 14, so that is when outdoor water and stored gear can safely come back online. Measurable snow is rare, so the freeze near Feb 20 — not snow load — drives the local prep list.

Your boat checklist

  1. Change the engine oil and filter while the motor is warm so contaminants leave with the old oil.
  2. Run the engine on antifreeze until pink fluid reaches the outlet, protecting the block and manifolds.
    Helpful gear: Marine antifreeze — Recommended pick
  3. Fog the cylinders with fogging oil as the engine runs down to coat internal parts against corrosion.
    Helpful gear: Fogging oil — Recommended pick
  4. Top off the fuel tank and add stabilizer to limit condensation and protect ethanol-blend fuel.
    Helpful gear: Marine fuel stabilizer — Recommended pick
  5. Drain the raw-water system, the livewell, and any washdown lines that can trap water.
  6. Remove the battery, charge it fully, and keep it on a maintainer over the layup.
    Helpful gear: Battery maintainer — Recommended pick
  7. Support the cover so snow and rain shed off, and leave vents so the interior can breathe.
  8. For an inboard or sterndrive, follow the manual closely — those blocks are the ones freeze claims hit hardest.

What to have on hand

Marine antifreeze
Propylene-glycol fluid rated for engine blocks and systems.
Recommended pick
Marine fuel stabilizer
Additive that protects ethanol-blend fuel over the layup.
Recommended pick
Fogging oil
Spray that coats cylinders against corrosion in storage.
Recommended pick
Battery maintainer
Keeps the cranking battery topped off on the trailer.
Recommended pick

What this means locally

Baytown freezes later than Pasadena (Jan 5) and later than League City (Jan 3) — a reminder that even nearby towns differ by days. Statewide, Texas prep dates run Jan 1 through Dec 29, which is why Baytown gets its own number rather than a Texas-wide average. The same freeze also decides when to winterize an RV and store a motorcycle.

Other winter jobs in Baytown

Every task below is dated to Baytown's own freeze and snow normals.

Sprinklers → Dec 18Frozen pipes → Nov 12Car battery → Dec 28Sump pump → Feb 20RV → Dec 18Motorcycle → Dec 4

See the full Baytown winter checklist, in order →

Frequently asked questions

At what temperature does a boat engine block crack?
Trapped water in an engine block or manifold can freeze and crack the casting once temperatures fall below 32°F and stay there long enough. Inboard and sterndrive blocks hold the most water and are the most vulnerable. Draining fully and adding antifreeze before the first hard freeze near Dec 28 is the protection.
Do outboards need winterizing?
Yes. An outboard should be drained so no water sits in the powerhead or lower unit, and the fuel system stabilized. Outboards self-drain better than inboards when tilted down, but fogging the cylinders and changing the gear oil are still part of a proper layup.
Fogging oil: is it necessary?
Fogging coats the cylinder walls and internal parts with a film that resists corrosion during months of storage. On engines that sit all winter it is cheap insurance against rust, especially in humid or coastal storage. Follow your engine maker's guidance on how to apply it.
How much does boat winterization cost?
A professional winterization varies with engine type and boat size, and inboards cost more than a simple outboard. Doing it yourself costs mainly antifreeze, oil, and fogging oil. Either way, the bill is far smaller than repairing a cracked block, which is the failure winterizing prevents.
Do boats in TX really need winterizing?
If temperatures reach freezing where the boat is stored, yes. Freeze claims are common in milder states precisely because owners assume they are safe and skip the step, then a rare cold snap cracks a block. Check the local freeze dates above and protect the engine before the first hard freeze.
When should I de-winterize my boat?
De-winterize in spring once the risk of a hard freeze has passed for your area. Reconnect and charge the battery, replace drain plugs, check hoses and clamps, and inspect the fuel system before the first launch. Reopening too early leaves the block exposed to a late cold snap.

Data: NOAA 1991–2020 normals via Baytown, live outlook by Open-Meteo. Sources · Methodology. Last updated: July 11, 2026.