FrostList

When to Winterize Your Boat in Sherman, TX

ON TRACK142 days until first 28°F freezeNov 30

The first 28°F freeze near Sherman averages November 30 (1991–2020 normals) — enough to crack an unprotected block even where owners assume they're safe — so winterize the boat by November 23. The early-to-late range spans roughly 39 days, so treat the median as a midpoint, not a promise.

OUTLOOK

Typical first first 28°F freeze near Nov 30; local deadline about Nov 23. The live 10-day outlook loads here.

Local freeze dates for Sherman

ThresholdEarly (1-in-10)MedianLate (9-in-10)
32°F (light freeze)Nov 2Nov 19Dec 6
28°F (hard freeze)Nov 11Nov 30Dec 20
24°F (severe)Nov 23Dec 14Jan 8

NOAA station: Sherman · 5.0 mi away · 760 ft elevation.

For Sherman, the nearest NOAA station with freeze data is Sherman, 5.0 miles out at 760 feet. Median first-freeze dates there run 32°F by Nov 19, 28°F by Nov 30, 24°F by Dec 14. Year to year the 28°F date has ranged from Nov 11 to Dec 20 — about 39 days apart. Spring's last 32°F freeze clears around Mar 14. Snowfall averages 1 inches a year.

Sherman usually sees its first 32°F night about Nov 19, with the first 28°F hard freeze close behind near Nov 30. The 32°F date swings from Nov 2 at its earliest to Dec 6 at its latest, near 34 days. The last spring freeze averages Mar 14 and as late as Apr 1, which sets the safe window for reopening outdoor water and de-winterizing gear. Snow barely registers here; the freeze date, around Mar 14, is the one that matters.

Your boat checklist

  1. Change the engine oil and filter while the motor is warm so contaminants leave with the old oil.
  2. Run the engine on antifreeze until pink fluid reaches the outlet, protecting the block and manifolds.
    Helpful gear: Marine antifreeze — Recommended pick
  3. Fog the cylinders with fogging oil as the engine runs down to coat internal parts against corrosion.
    Helpful gear: Fogging oil — Recommended pick
  4. Top off the fuel tank and add stabilizer to limit condensation and protect ethanol-blend fuel.
    Helpful gear: Marine fuel stabilizer — Recommended pick
  5. Drain the raw-water system, the livewell, and any washdown lines that can trap water.
  6. Remove the battery, charge it fully, and keep it on a maintainer over the layup.
    Helpful gear: Battery maintainer — Recommended pick
  7. Support the cover so snow and rain shed off, and leave vents so the interior can breathe.
  8. For an inboard or sterndrive, follow the manual closely — those blocks are the ones freeze claims hit hardest.

What to have on hand

Marine antifreeze
Propylene-glycol fluid rated for engine blocks and systems.
Recommended pick
Marine fuel stabilizer
Additive that protects ethanol-blend fuel over the layup.
Recommended pick
Fogging oil
Spray that coats cylinders against corrosion in storage.
Recommended pick
Battery maintainer
Keeps the cranking battery topped off on the trailer.
Recommended pick

What this means locally

Against its neighbors, Sherman (first freeze Nov 30) runs close to McKinney (Nov 30) and about a week ahead of Frisco (Dec 4). Across Texas, local prep deadlines in our data range from Jan 1 to Dec 29, so a statewide rule of thumb would miss Sherman by weeks. In Sherman, that same cold is your cue to winterize an RV and store a motorcycle.

Other winter jobs in Sherman

Every task below is dated to Sherman's own freeze and snow normals.

Sprinklers → Nov 20Frozen pipes → Nov 2Car battery → Nov 30Sump pump → Mar 14RV → Nov 20Motorcycle → Nov 19

See the full Sherman winter checklist, in order →

Frequently asked questions

At what temperature does a boat engine block crack?
Trapped water in an engine block or manifold can freeze and crack the casting once temperatures fall below 32°F and stay there long enough. Inboard and sterndrive blocks hold the most water and are the most vulnerable. Draining fully and adding antifreeze before the first hard freeze near Nov 30 is the protection.
Do outboards need winterizing?
Yes. An outboard should be drained so no water sits in the powerhead or lower unit, and the fuel system stabilized. Outboards self-drain better than inboards when tilted down, but fogging the cylinders and changing the gear oil are still part of a proper layup.
Fogging oil: is it necessary?
Fogging coats the cylinder walls and internal parts with a film that resists corrosion during months of storage. On engines that sit all winter it is cheap insurance against rust, especially in humid or coastal storage. Follow your engine maker's guidance on how to apply it.
How much does boat winterization cost?
A professional winterization varies with engine type and boat size, and inboards cost more than a simple outboard. Doing it yourself costs mainly antifreeze, oil, and fogging oil. Either way, the bill is far smaller than repairing a cracked block, which is the failure winterizing prevents.
Do boats in TX really need winterizing?
If temperatures reach freezing where the boat is stored, yes. Freeze claims are common in milder states precisely because owners assume they are safe and skip the step, then a rare cold snap cracks a block. Check the local freeze dates above and protect the engine before the first hard freeze.
When should I de-winterize my boat?
De-winterize in spring once the risk of a hard freeze has passed for your area. Reconnect and charge the battery, replace drain plugs, check hoses and clamps, and inspect the fuel system before the first launch. Reopening too early leaves the block exposed to a late cold snap.

Data: NOAA 1991–2020 normals via Sherman, live outlook by Open-Meteo. Sources · Methodology. Last updated: July 11, 2026.