FrostList

When to Winterize Your Boat in Murray, UT

ON TRACK110 days until first 28°F freezeOct 29

The first 28°F freeze near Murray averages October 29 (1991–2020 normals) — enough to crack an unprotected block even where owners assume they're safe — so winterize the boat by October 22. The early-to-late range spans roughly 31 days, so treat the median as a midpoint, not a promise.

OUTLOOK

Typical first first 28°F freeze near Oct 29; local deadline about Oct 22. The live 10-day outlook loads here.

Local freeze dates for Murray

ThresholdEarly (1-in-10)MedianLate (9-in-10)
32°F (light freeze)Oct 5Oct 18Nov 1
28°F (hard freeze)Oct 15Oct 29Nov 15
24°F (severe)Oct 22Nov 9Nov 28

NOAA station: Salt Lake City E Bench · 6.1 mi away · 4,850 ft elevation.

For Murray, the nearest NOAA station with freeze data is Salt Lake City E Bench, 6.1 miles out at 4,850 feet. Median first-freeze dates there run 32°F by Oct 18, 28°F by Oct 29, 24°F by Nov 9. Year to year the 28°F date has ranged from Oct 15 to Nov 15 — about 31 days apart. Spring's last 32°F freeze clears around Apr 25. Snowfall averages 82 inches a year, first reaching an inch near October.

In Murray, freezing nights (32°F) typically begin around Oct 18 and the first hard freeze (28°F) follows near Oct 29. Year to year, the first 32°F night has fallen anywhere from Oct 5 to Nov 1 — about 27 days apart. Spring's final freeze lands near Apr 25 and as late as May 10, so that is when outdoor water and stored gear can safely come back online. With about 82 inches of snow a year, roof, snow-blower, and ice-dam prep all belong on the same calendar.

Your boat checklist

  1. Change the engine oil and filter while the motor is warm so contaminants leave with the old oil.
  2. Run the engine on antifreeze until pink fluid reaches the outlet, protecting the block and manifolds.
    Helpful gear: Marine antifreeze — Recommended pick
  3. Fog the cylinders with fogging oil as the engine runs down to coat internal parts against corrosion.
    Helpful gear: Fogging oil — Recommended pick
  4. Top off the fuel tank and add stabilizer to limit condensation and protect ethanol-blend fuel.
    Helpful gear: Marine fuel stabilizer — Recommended pick
  5. Drain the raw-water system, the livewell, and any washdown lines that can trap water.
  6. Remove the battery, charge it fully, and keep it on a maintainer over the layup.
    Helpful gear: Battery maintainer — Recommended pick
  7. Support the cover so snow and rain shed off, and leave vents so the interior can breathe.
  8. For an inboard or sterndrive, follow the manual closely — those blocks are the ones freeze claims hit hardest.

What to have on hand

Marine antifreeze
Propylene-glycol fluid rated for engine blocks and systems.
Recommended pick
Marine fuel stabilizer
Additive that protects ethanol-blend fuel over the layup.
Recommended pick
Fogging oil
Spray that coats cylinders against corrosion in storage.
Recommended pick
Battery maintainer
Keeps the cranking battery topped off on the trailer.
Recommended pick

What this means locally

Compared with nearby cities, Murray's first-freeze date near Oct 29 sits about a week ahead of Taylorsville (Nov 18) and close to West Jordan (Nov 1). Utah's deadlines span Oct 7 to Nov 13 statewide — one date for all of Utah would be off by weeks for Murray. Once you know Murray's freeze date, use it to winterize an RV and store a motorcycle too.

Other winter jobs in Murray

Every task below is dated to Murray's own freeze and snow normals.

Sprinklers → Oct 19Frozen pipes → Oct 5Ice dams → Sep 15Car battery → Oct 29Snow blower → Sep 24Sump pump → Apr 25RV → Oct 19Motorcycle → Oct 18

See the full Murray winter checklist, in order →

Frequently asked questions

At what temperature does a boat engine block crack?
Trapped water in an engine block or manifold can freeze and crack the casting once temperatures fall below 32°F and stay there long enough. Inboard and sterndrive blocks hold the most water and are the most vulnerable. Draining fully and adding antifreeze before the first hard freeze near Oct 29 is the protection.
Do outboards need winterizing?
Yes. An outboard should be drained so no water sits in the powerhead or lower unit, and the fuel system stabilized. Outboards self-drain better than inboards when tilted down, but fogging the cylinders and changing the gear oil are still part of a proper layup.
Fogging oil: is it necessary?
Fogging coats the cylinder walls and internal parts with a film that resists corrosion during months of storage. On engines that sit all winter it is cheap insurance against rust, especially in humid or coastal storage. Follow your engine maker's guidance on how to apply it.
How much does boat winterization cost?
A professional winterization varies with engine type and boat size, and inboards cost more than a simple outboard. Doing it yourself costs mainly antifreeze, oil, and fogging oil. Either way, the bill is far smaller than repairing a cracked block, which is the failure winterizing prevents.
Do boats in UT really need winterizing?
If temperatures reach freezing where the boat is stored, yes. Freeze claims are common in milder states precisely because owners assume they are safe and skip the step, then a rare cold snap cracks a block. Check the local freeze dates above and protect the engine before the first hard freeze.
When should I de-winterize my boat?
De-winterize in spring once the risk of a hard freeze has passed for your area. Reconnect and charge the battery, replace drain plugs, check hoses and clamps, and inspect the fuel system before the first launch. Reopening too early leaves the block exposed to a late cold snap.

Data: NOAA 1991–2020 normals via Salt Lake City E Bench, live outlook by Open-Meteo. Sources · Methodology. Last updated: July 11, 2026.