FrostList

When to Winterize Your Boat in Sammamish, WA

ON TRACK141 days until first 28°F freezeNov 29

In Sammamish, target November 22 to drain, antifreeze, and lay up the boat, about a week before the median first 28°F freeze of November 29; a surprise cold snap is exactly how freeze claims happen. The early-odds date runs roughly 23 days ahead of the median, so build in that buffer.

OUTLOOK

Typical first first 28°F freeze near Nov 29; local deadline about Nov 22. The live 10-day outlook loads here.

Local freeze dates for Sammamish

ThresholdEarly (1-in-10)MedianLate (9-in-10)
32°F (light freeze)Oct 22Nov 7Dec 1
28°F (hard freeze)Nov 6Nov 29Dec 31
24°F (severe)Nov 21Dec 18Feb 6

NOAA station: Snoqualmie Falls · 10.6 mi away · 440 ft elevation.

For Sammamish, the nearest NOAA station with freeze data is Snoqualmie Falls, 10.6 miles out at 440 feet. Median first-freeze dates there run 32°F by Nov 7, 28°F by Nov 29, 24°F by Dec 18. The 28°F freeze has come as early as Nov 6 and as late as Dec 31, a 55-day spread. Spring's last 32°F freeze clears around Mar 30. Snowfall averages 4 inches a year, first reaching an inch near December.

The freeze arrives in two steps in Sammamish: 32°F around Nov 7, then a hard 28°F near Nov 29. The 32°F date swings from Oct 22 at its earliest to Dec 1 at its latest, near 40 days. The last spring freeze averages Mar 30 and as late as Apr 21, which sets the safe window for reopening outdoor water and de-winterizing gear. At about 4 inches of snow a year, the freeze — not snow load — is the thing to plan around.

Your boat checklist

  1. Change the engine oil and filter while the motor is warm so contaminants leave with the old oil.
  2. Run the engine on antifreeze until pink fluid reaches the outlet, protecting the block and manifolds.
    Helpful gear: Marine antifreeze — Recommended pick
  3. Fog the cylinders with fogging oil as the engine runs down to coat internal parts against corrosion.
    Helpful gear: Fogging oil — Recommended pick
  4. Top off the fuel tank and add stabilizer to limit condensation and protect ethanol-blend fuel.
    Helpful gear: Marine fuel stabilizer — Recommended pick
  5. Drain the raw-water system, the livewell, and any washdown lines that can trap water.
  6. Remove the battery, charge it fully, and keep it on a maintainer over the layup.
    Helpful gear: Battery maintainer — Recommended pick
  7. Support the cover so snow and rain shed off, and leave vents so the interior can breathe.
  8. For an inboard or sterndrive, follow the manual closely — those blocks are the ones freeze claims hit hardest.

What to have on hand

Marine antifreeze
Propylene-glycol fluid rated for engine blocks and systems.
Recommended pick
Marine fuel stabilizer
Additive that protects ethanol-blend fuel over the layup.
Recommended pick
Fogging oil
Spray that coats cylinders against corrosion in storage.
Recommended pick
Battery maintainer
Keeps the cranking battery topped off on the trailer.
Recommended pick

What this means locally

Compared with nearby cities, Sammamish's first-freeze date near Nov 29 sits about a week ahead of Redmond (Dec 11) and about a week ahead of Bellevue (Dec 11). Washington's deadlines span Oct 9 to Dec 4 statewide — one date for all of Washington would be off by weeks for Sammamish. Once you know Sammamish's freeze date, use it to winterize an RV and store a motorcycle too.

Other winter jobs in Sammamish

Every task below is dated to Sammamish's own freeze and snow normals.

Sprinklers → Nov 19Frozen pipes → Oct 22Ice dams → Nov 15Car battery → Nov 29Snow blower → Nov 24Sump pump → Mar 30RV → Nov 19Motorcycle → Nov 7

See the full Sammamish winter checklist, in order →

Frequently asked questions

At what temperature does a boat engine block crack?
Trapped water in an engine block or manifold can freeze and crack the casting once temperatures fall below 32°F and stay there long enough. Inboard and sterndrive blocks hold the most water and are the most vulnerable. Draining fully and adding antifreeze before the first hard freeze near Nov 29 is the protection.
Do outboards need winterizing?
Yes. An outboard should be drained so no water sits in the powerhead or lower unit, and the fuel system stabilized. Outboards self-drain better than inboards when tilted down, but fogging the cylinders and changing the gear oil are still part of a proper layup.
Fogging oil: is it necessary?
Fogging coats the cylinder walls and internal parts with a film that resists corrosion during months of storage. On engines that sit all winter it is cheap insurance against rust, especially in humid or coastal storage. Follow your engine maker's guidance on how to apply it.
How much does boat winterization cost?
A professional winterization varies with engine type and boat size, and inboards cost more than a simple outboard. Doing it yourself costs mainly antifreeze, oil, and fogging oil. Either way, the bill is far smaller than repairing a cracked block, which is the failure winterizing prevents.
Do boats in WA really need winterizing?
If temperatures reach freezing where the boat is stored, yes. Freeze claims are common in milder states precisely because owners assume they are safe and skip the step, then a rare cold snap cracks a block. Check the local freeze dates above and protect the engine before the first hard freeze.
When should I de-winterize my boat?
De-winterize in spring once the risk of a hard freeze has passed for your area. Reconnect and charge the battery, replace drain plugs, check hoses and clamps, and inspect the fuel system before the first launch. Reopening too early leaves the block exposed to a late cold snap.

Data: NOAA 1991–2020 normals via Snoqualmie Falls, live outlook by Open-Meteo. Sources · Methodology. Last updated: July 11, 2026.