When to Winterize Sprinklers in Kirkland, WA
Kirkland's median first 28°F hard freeze is December 11 (1991–2020 NOAA normals), and it can strike as early as November 17 — so winterize your sprinkler system in Kirkland by December 1. The early-odds date runs roughly 24 days ahead of the median, so build in that buffer.
Typical first first 28°F freeze near Dec 11; local deadline about Dec 1. The live 10-day outlook loads here.
Local freeze dates for Kirkland
| Threshold | Early (1-in-10) | Median | Late (9-in-10) |
|---|---|---|---|
| 32°F (light freeze) | Nov 4 | Nov 23 | Dec 16 |
| 28°F (hard freeze) | Nov 17 | Dec 11 | Jan 17 |
| 24°F (severe) | Nov 27 | Dec 24 | Feb 8 |
NOAA station: Seattle Sand Pt Wsfo · 2.2 mi away · 60 ft elevation.
- Hard freezes are rare and late in Kirkland, which is exactly why they catch people off guard when they do come.
- The 61-day gap between the earliest and latest freeze dates here is wide, so the live outlook matters more than the calendar.
The reference station for Kirkland is Seattle Sand Pt Wsfo (2.2 mi, 60 ft). First freeze there: 32°F by Nov 23, 28°F by Dec 11, 24°F by Dec 24. That hard freeze has landed anywhere from Nov 17 to Jan 17, a swing of roughly 61 days. Spring's last 32°F freeze clears around Mar 8. Snowfall averages 4 inches a year, first reaching an inch near December.
The freeze arrives in two steps in Kirkland: 32°F around Nov 23, then a hard 28°F near Dec 11. The 32°F date swings from Nov 4 at its earliest to Dec 16 at its latest, near 42 days. The last spring freeze averages Mar 8 and as late as Mar 29, which sets the safe window for reopening outdoor water and de-winterizing gear. At about 4 inches of snow a year, the freeze — not snow load — is the thing to plan around.
Your sprinklers checklist
- Shut off the irrigation water supply at the main valve and, if you have one, the dedicated sprinkler shutoff inside the house.
- Turn off the controller or set it to the "rain" mode so valves do not open while the system is dry.
- Drain the mainline using the manual, automatic, or blow-out method your system was built for; most pros prefer a blow-out.
- Connect a compressor to the blow-out port through a proper adapter and run 40–80 psi, one zone at a time, until the heads mist and clear.Helpful gear: Air compressor blow-out adapter — Recommended pick
- Insulate the backflow preventer and any above-ground valves; this brass assembly is usually the first part to crack.Helpful gear: Insulated backflow preventer cover — Recommended pick
- Cap outdoor hose bibs with foam covers after the hoses come off so the last exposed fittings stay protected.Helpful gear: Foam outdoor faucet covers — Recommended pick
- Open the backflow test cocks a quarter turn so any trapped water has room to expand.
- Log the date and the psi you used; you will want the reference next fall.
What to have on hand
As an Amazon Associate we may earn from qualifying purchases. Product picks are editorial; links do not change what you pay.
What this means locally
Kirkland freezes close to Redmond (Dec 11) and close to Bellevue (Dec 11) — a reminder that even nearby towns differ by days. Statewide, Washington prep dates run Oct 6 through Dec 1, which is why Kirkland gets its own number rather than a Washington-wide average. The same freeze also decides when to protect your indoor pipes and winterize an RV if you own one.
Other winter jobs in Kirkland
Every task below is dated to Kirkland's own freeze and snow normals.
Get the Sprinkler Winterization alert for your city
We will email you when local conditions cross the line. Double opt-in; unsubscribe anytime.
Frequently asked questions
What temperature freezes sprinkler pipes?
Do I need to blow out my sprinklers or just drain them?
What happens if I don't winterize my sprinkler system?
How much does a sprinkler blowout cost?
When should I turn my sprinklers back on in Kirkland?
Can I winterize sprinklers myself?
Data: NOAA 1991–2020 normals via Seattle Sand Pt Wsfo, live outlook by Open-Meteo. Sources · Methodology. Last updated: July 11, 2026.