FrostList

When to Winterize Your Boat in Clovis, NM

ON TRACK120 days until first 28°F freezeNov 8

In Clovis, target November 1 to drain, antifreeze, and lay up the boat, about a week before the median first 28°F freeze of November 8; a surprise cold snap is exactly how freeze claims happen. The early-to-late range spans roughly 25 days, so treat the median as a midpoint, not a promise.

OUTLOOK

Typical first first 28°F freeze near Nov 8; local deadline about Nov 1. The live 10-day outlook loads here.

Local freeze dates for Clovis

ThresholdEarly (1-in-10)MedianLate (9-in-10)
32°F (light freeze)Oct 17Oct 29Nov 10
28°F (hard freeze)Oct 26Nov 8Nov 20
24°F (severe)Nov 1Nov 16Dec 1

NOAA station: Clovis · 1.7 mi away · 4,295 ft elevation.

Clovis draws its numbers from Clovis, 4,295 feet up and 1.7 miles away. Its median first-freeze dates are 32°F by Oct 29, 28°F by Nov 8, 24°F by Nov 16. Year to year the 28°F date has ranged from Oct 26 to Nov 20 — about 25 days apart. Spring's last 32°F freeze clears around Apr 14. Snowfall averages 13 inches a year, first reaching an inch near November.

Expect the first frost near Oct 29 in Clovis and the first hard freeze by about Nov 8. The 32°F date swings from Oct 17 at its earliest to Nov 10 at its latest, near 24 days. The last spring freeze averages Apr 14 and as late as Apr 26, which sets the safe window for reopening outdoor water and de-winterizing gear. At about 13 inches of snow a year, the freeze — not snow load — is the thing to plan around.

Your boat checklist

  1. Change the engine oil and filter while the motor is warm so contaminants leave with the old oil.
  2. Run the engine on antifreeze until pink fluid reaches the outlet, protecting the block and manifolds.
    Helpful gear: Marine antifreeze — Recommended pick
  3. Fog the cylinders with fogging oil as the engine runs down to coat internal parts against corrosion.
    Helpful gear: Fogging oil — Recommended pick
  4. Top off the fuel tank and add stabilizer to limit condensation and protect ethanol-blend fuel.
    Helpful gear: Marine fuel stabilizer — Recommended pick
  5. Drain the raw-water system, the livewell, and any washdown lines that can trap water.
  6. Remove the battery, charge it fully, and keep it on a maintainer over the layup.
    Helpful gear: Battery maintainer — Recommended pick
  7. Support the cover so snow and rain shed off, and leave vents so the interior can breathe.
  8. For an inboard or sterndrive, follow the manual closely — those blocks are the ones freeze claims hit hardest.

What to have on hand

Marine antifreeze
Propylene-glycol fluid rated for engine blocks and systems.
Recommended pick
Marine fuel stabilizer
Additive that protects ethanol-blend fuel over the layup.
Recommended pick
Fogging oil
Spray that coats cylinders against corrosion in storage.
Recommended pick
Battery maintainer
Keeps the cranking battery topped off on the trailer.
Recommended pick

What this means locally

Compared with nearby cities, Clovis's first-freeze date near Nov 8 sits about a week ahead of Lubbock (Nov 21) and close to Amarillo (Nov 6). New Mexico's deadlines span Oct 9 to Nov 17 statewide — one date for all of New Mexico would be off by weeks for Clovis. Once you know Clovis's freeze date, use it to winterize an RV and store a motorcycle too.

Other winter jobs in Clovis

Every task below is dated to Clovis's own freeze and snow normals.

Sprinklers → Oct 29Frozen pipes → Oct 17Ice dams → Oct 16Car battery → Nov 8Snow blower → Oct 25Sump pump → Apr 14RV → Oct 29Motorcycle → Oct 29

See the full Clovis winter checklist, in order →

Frequently asked questions

At what temperature does a boat engine block crack?
Trapped water in an engine block or manifold can freeze and crack the casting once temperatures fall below 32°F and stay there long enough. Inboard and sterndrive blocks hold the most water and are the most vulnerable. Draining fully and adding antifreeze before the first hard freeze near Nov 8 is the protection.
Do outboards need winterizing?
Yes. An outboard should be drained so no water sits in the powerhead or lower unit, and the fuel system stabilized. Outboards self-drain better than inboards when tilted down, but fogging the cylinders and changing the gear oil are still part of a proper layup.
Fogging oil: is it necessary?
Fogging coats the cylinder walls and internal parts with a film that resists corrosion during months of storage. On engines that sit all winter it is cheap insurance against rust, especially in humid or coastal storage. Follow your engine maker's guidance on how to apply it.
How much does boat winterization cost?
A professional winterization varies with engine type and boat size, and inboards cost more than a simple outboard. Doing it yourself costs mainly antifreeze, oil, and fogging oil. Either way, the bill is far smaller than repairing a cracked block, which is the failure winterizing prevents.
Do boats in NM really need winterizing?
If temperatures reach freezing where the boat is stored, yes. Freeze claims are common in milder states precisely because owners assume they are safe and skip the step, then a rare cold snap cracks a block. Check the local freeze dates above and protect the engine before the first hard freeze.
When should I de-winterize my boat?
De-winterize in spring once the risk of a hard freeze has passed for your area. Reconnect and charge the battery, replace drain plugs, check hoses and clamps, and inspect the fuel system before the first launch. Reopening too early leaves the block exposed to a late cold snap.

Data: NOAA 1991–2020 normals via Clovis, live outlook by Open-Meteo. Sources · Methodology. Last updated: July 11, 2026.