FrostList

When to Winterize Your Boat in Midland, TX

ON TRACK130 days until first 28°F freezeNov 18

In Midland, target November 11 to drain, antifreeze, and lay up the boat, about a week before the median first 28°F freeze of November 18; a surprise cold snap is exactly how freeze claims happen. Year to year the date swings about 32 days, which is why the live outlook beats the calendar.

OUTLOOK

Typical first first 28°F freeze near Nov 18; local deadline about Nov 11. The live 10-day outlook loads here.

Local freeze dates for Midland

ThresholdEarly (1-in-10)MedianLate (9-in-10)
32°F (light freeze)Oct 25Nov 9Nov 24
28°F (hard freeze)Nov 4Nov 18Dec 6
24°F (severe)Nov 13Nov 30Dec 20

NOAA station: Midland 4 Ene · 3.4 mi away · 2,776 ft elevation.

For Midland, the nearest NOAA station with freeze data is Midland 4 Ene, 3.4 miles out at 2,776 feet. Median first-freeze dates there run 32°F by Nov 9, 28°F by Nov 18, 24°F by Nov 30. Year to year the 28°F date has ranged from Nov 4 to Dec 6 — about 32 days apart. Spring's last 32°F freeze clears around Mar 26. Snowfall averages 2 inches a year.

The freeze arrives in two steps in Midland: 32°F around Nov 9, then a hard 28°F near Nov 18. Year to year, the first 32°F night has fallen anywhere from Oct 25 to Nov 24 — about 30 days apart. Spring's final freeze lands near Mar 26 and as late as Apr 15, so that is when outdoor water and stored gear can safely come back online. Measurable snow is rare, so the freeze near Mar 26 — not snow load — drives the local prep list.

Your boat checklist

  1. Change the engine oil and filter while the motor is warm so contaminants leave with the old oil.
  2. Run the engine on antifreeze until pink fluid reaches the outlet, protecting the block and manifolds.
    Helpful gear: Marine antifreeze — Recommended pick
  3. Fog the cylinders with fogging oil as the engine runs down to coat internal parts against corrosion.
    Helpful gear: Fogging oil — Recommended pick
  4. Top off the fuel tank and add stabilizer to limit condensation and protect ethanol-blend fuel.
    Helpful gear: Marine fuel stabilizer — Recommended pick
  5. Drain the raw-water system, the livewell, and any washdown lines that can trap water.
  6. Remove the battery, charge it fully, and keep it on a maintainer over the layup.
    Helpful gear: Battery maintainer — Recommended pick
  7. Support the cover so snow and rain shed off, and leave vents so the interior can breathe.
  8. For an inboard or sterndrive, follow the manual closely — those blocks are the ones freeze claims hit hardest.

What to have on hand

Marine antifreeze
Propylene-glycol fluid rated for engine blocks and systems.
Recommended pick
Marine fuel stabilizer
Additive that protects ethanol-blend fuel over the layup.
Recommended pick
Fogging oil
Spray that coats cylinders against corrosion in storage.
Recommended pick
Battery maintainer
Keeps the cranking battery topped off on the trailer.
Recommended pick

What this means locally

Against its neighbors, Midland (first freeze Nov 18) runs about a week ahead of Odessa (Nov 26) and about a week ahead of San Angelo (Nov 22). Across Texas, local prep deadlines in our data range from Jan 1 to Dec 29, so a statewide rule of thumb would miss Midland by weeks. In Midland, that same cold is your cue to winterize an RV and store a motorcycle.

Other winter jobs in Midland

Every task below is dated to Midland's own freeze and snow normals.

Sprinklers → Nov 8Frozen pipes → Oct 25Car battery → Nov 18Sump pump → Mar 26RV → Nov 8Motorcycle → Nov 9

See the full Midland winter checklist, in order →

Frequently asked questions

At what temperature does a boat engine block crack?
Trapped water in an engine block or manifold can freeze and crack the casting once temperatures fall below 32°F and stay there long enough. Inboard and sterndrive blocks hold the most water and are the most vulnerable. Draining fully and adding antifreeze before the first hard freeze near Nov 18 is the protection.
Do outboards need winterizing?
Yes. An outboard should be drained so no water sits in the powerhead or lower unit, and the fuel system stabilized. Outboards self-drain better than inboards when tilted down, but fogging the cylinders and changing the gear oil are still part of a proper layup.
Fogging oil: is it necessary?
Fogging coats the cylinder walls and internal parts with a film that resists corrosion during months of storage. On engines that sit all winter it is cheap insurance against rust, especially in humid or coastal storage. Follow your engine maker's guidance on how to apply it.
How much does boat winterization cost?
A professional winterization varies with engine type and boat size, and inboards cost more than a simple outboard. Doing it yourself costs mainly antifreeze, oil, and fogging oil. Either way, the bill is far smaller than repairing a cracked block, which is the failure winterizing prevents.
Do boats in TX really need winterizing?
If temperatures reach freezing where the boat is stored, yes. Freeze claims are common in milder states precisely because owners assume they are safe and skip the step, then a rare cold snap cracks a block. Check the local freeze dates above and protect the engine before the first hard freeze.
When should I de-winterize my boat?
De-winterize in spring once the risk of a hard freeze has passed for your area. Reconnect and charge the battery, replace drain plugs, check hoses and clamps, and inspect the fuel system before the first launch. Reopening too early leaves the block exposed to a late cold snap.

Data: NOAA 1991–2020 normals via Midland 4 Ene, live outlook by Open-Meteo. Sources · Methodology. Last updated: July 11, 2026.