FrostList

When to Winterize Your Boat in Port Arthur, TX

SEASON PASSED174 days until first 28°F freezeJan 1

Plan to haul out and winterize your boat in Port Arthur by December 25. The first 28°F freeze near Port Arthur averages January 1 in the 1991–2020 normals, and freeze damage often surprises owners in milder states. The early-to-late range spans roughly 64 days, so treat the median as a midpoint, not a promise.

OUTLOOK

Typical first first 28°F freeze near Jan 1; local deadline about Dec 25. The live 10-day outlook loads here.

Local freeze dates for Port Arthur

ThresholdEarly (1-in-10)MedianLate (9-in-10)
32°F (light freeze)Nov 15Dec 7Jan 9
28°F (hard freeze)Dec 1Jan 1Feb 3
24°F (severe)Dec 12Jan 7Feb 11

NOAA station: Port Arthur Se Tx AP · 6.6 mi away · 16 ft elevation.

Numbers for Port Arthur come from Port Arthur Se Tx AP, 6.6 miles away at 16 feet, where the medians fall 32°F by Dec 7, 28°F by Jan 1, 24°F by Jan 7. That hard freeze has landed anywhere from Dec 1 to Feb 3, a swing of roughly 64 days. Spring's last 32°F freeze clears around Feb 14. Snowfall averages 0 inches a year.

Expect the first frost near Dec 7 in Port Arthur and the first hard freeze by about Jan 1. The 32°F date swings from Nov 15 at its earliest to Jan 9 at its latest, near 55 days. The last spring freeze averages Feb 14 and as late as Mar 13, which sets the safe window for reopening outdoor water and de-winterizing gear. Snow barely registers here; the freeze date, around Feb 14, is the one that matters.

Your boat checklist

  1. Change the engine oil and filter while the motor is warm so contaminants leave with the old oil.
  2. Run the engine on antifreeze until pink fluid reaches the outlet, protecting the block and manifolds.
    Helpful gear: Marine antifreeze — Recommended pick
  3. Fog the cylinders with fogging oil as the engine runs down to coat internal parts against corrosion.
    Helpful gear: Fogging oil — Recommended pick
  4. Top off the fuel tank and add stabilizer to limit condensation and protect ethanol-blend fuel.
    Helpful gear: Marine fuel stabilizer — Recommended pick
  5. Drain the raw-water system, the livewell, and any washdown lines that can trap water.
  6. Remove the battery, charge it fully, and keep it on a maintainer over the layup.
    Helpful gear: Battery maintainer — Recommended pick
  7. Support the cover so snow and rain shed off, and leave vents so the interior can breathe.
  8. For an inboard or sterndrive, follow the manual closely — those blocks are the ones freeze claims hit hardest.

What to have on hand

Marine antifreeze
Propylene-glycol fluid rated for engine blocks and systems.
Recommended pick
Marine fuel stabilizer
Additive that protects ethanol-blend fuel over the layup.
Recommended pick
Fogging oil
Spray that coats cylinders against corrosion in storage.
Recommended pick
Battery maintainer
Keeps the cranking battery topped off on the trailer.
Recommended pick

What this means locally

Compared with nearby cities, Port Arthur's first-freeze date near Jan 1 sits about a week ahead of Beaumont (Dec 28) and close to Lake Charles (Jan 3). Texas's deadlines span Jan 1 to Dec 29 statewide — one date for all of Texas would be off by weeks for Port Arthur. Once you know Port Arthur's freeze date, use it to winterize an RV and store a motorcycle too.

Other winter jobs in Port Arthur

Every task below is dated to Port Arthur's own freeze and snow normals.

Sprinklers → Dec 22Frozen pipes → Nov 15Car battery → Jan 1Sump pump → Feb 14RV → Dec 22Motorcycle → Dec 7

See the full Port Arthur winter checklist, in order →

Frequently asked questions

At what temperature does a boat engine block crack?
Trapped water in an engine block or manifold can freeze and crack the casting once temperatures fall below 32°F and stay there long enough. Inboard and sterndrive blocks hold the most water and are the most vulnerable. Draining fully and adding antifreeze before the first hard freeze near Jan 1 is the protection.
Do outboards need winterizing?
Yes. An outboard should be drained so no water sits in the powerhead or lower unit, and the fuel system stabilized. Outboards self-drain better than inboards when tilted down, but fogging the cylinders and changing the gear oil are still part of a proper layup.
Fogging oil: is it necessary?
Fogging coats the cylinder walls and internal parts with a film that resists corrosion during months of storage. On engines that sit all winter it is cheap insurance against rust, especially in humid or coastal storage. Follow your engine maker's guidance on how to apply it.
How much does boat winterization cost?
A professional winterization varies with engine type and boat size, and inboards cost more than a simple outboard. Doing it yourself costs mainly antifreeze, oil, and fogging oil. Either way, the bill is far smaller than repairing a cracked block, which is the failure winterizing prevents.
Do boats in TX really need winterizing?
If temperatures reach freezing where the boat is stored, yes. Freeze claims are common in milder states precisely because owners assume they are safe and skip the step, then a rare cold snap cracks a block. Check the local freeze dates above and protect the engine before the first hard freeze.
When should I de-winterize my boat?
De-winterize in spring once the risk of a hard freeze has passed for your area. Reconnect and charge the battery, replace drain plugs, check hoses and clamps, and inspect the fuel system before the first launch. Reopening too early leaves the block exposed to a late cold snap.

Data: NOAA 1991–2020 normals via Port Arthur Se Tx AP, live outlook by Open-Meteo. Sources · Methodology. Last updated: July 11, 2026.