FrostList

When to Winterize Your Boat in Marysville, WA

ON TRACK133 days until first 28°F freezeNov 21

In Marysville, target November 14 to drain, antifreeze, and lay up the boat, about a week before the median first 28°F freeze of November 21; a surprise cold snap is exactly how freeze claims happen. Plan for the early end: the one-in-ten date lands about 23 days before the median.

OUTLOOK

Typical first first 28°F freeze near Nov 21; local deadline about Nov 14. The live 10-day outlook loads here.

Local freeze dates for Marysville

ThresholdEarly (1-in-10)MedianLate (9-in-10)
32°F (light freeze)Oct 16Nov 2Nov 23
28°F (hard freeze)Oct 29Nov 21Dec 14
24°F (severe)Nov 12Dec 5Jan 11

NOAA station: Everett · 5.3 mi away · 60 ft elevation.

The reference station for Marysville is Everett (5.3 mi, 60 ft). First freeze there: 32°F by Nov 2, 28°F by Nov 21, 24°F by Dec 5. Year to year the 28°F date has ranged from Oct 29 to Dec 14 — about 46 days apart. Spring's last 32°F freeze clears around Mar 24. Snowfall averages 4 inches a year, first reaching an inch near December.

Marysville usually sees its first 32°F night about Nov 2, with the first 28°F hard freeze close behind near Nov 21. That first freezing night has ranged from Oct 16 to Nov 23, roughly a 38-day spread. On the spring side, the last 32°F freeze clears around Mar 24 and as late as Apr 11 — the green light for reopening water and de-winterizing. Only about 4 inches of snow falls in a typical year, so cold protection outranks snow removal.

Your boat checklist

  1. Change the engine oil and filter while the motor is warm so contaminants leave with the old oil.
  2. Run the engine on antifreeze until pink fluid reaches the outlet, protecting the block and manifolds.
    Helpful gear: Marine antifreeze — Recommended pick
  3. Fog the cylinders with fogging oil as the engine runs down to coat internal parts against corrosion.
    Helpful gear: Fogging oil — Recommended pick
  4. Top off the fuel tank and add stabilizer to limit condensation and protect ethanol-blend fuel.
    Helpful gear: Marine fuel stabilizer — Recommended pick
  5. Drain the raw-water system, the livewell, and any washdown lines that can trap water.
  6. Remove the battery, charge it fully, and keep it on a maintainer over the layup.
    Helpful gear: Battery maintainer — Recommended pick
  7. Support the cover so snow and rain shed off, and leave vents so the interior can breathe.
  8. For an inboard or sterndrive, follow the manual closely — those blocks are the ones freeze claims hit hardest.

What to have on hand

Marine antifreeze
Propylene-glycol fluid rated for engine blocks and systems.
Recommended pick
Marine fuel stabilizer
Additive that protects ethanol-blend fuel over the layup.
Recommended pick
Fogging oil
Spray that coats cylinders against corrosion in storage.
Recommended pick
Battery maintainer
Keeps the cranking battery topped off on the trailer.
Recommended pick

What this means locally

Marysville freezes close to Everett (Nov 21) and about a week ahead of Edmonds (Dec 6) — a reminder that even nearby towns differ by days. Statewide, Washington prep dates run Oct 9 through Dec 4, which is why Marysville gets its own number rather than a Washington-wide average. The same freeze also decides when to winterize an RV and store a motorcycle.

Other winter jobs in Marysville

Every task below is dated to Marysville's own freeze and snow normals.

Sprinklers → Nov 11Frozen pipes → Oct 16Ice dams → Nov 15Car battery → Nov 21Snow blower → Nov 24Sump pump → Mar 24RV → Nov 11Motorcycle → Nov 2

See the full Marysville winter checklist, in order →

Frequently asked questions

At what temperature does a boat engine block crack?
Trapped water in an engine block or manifold can freeze and crack the casting once temperatures fall below 32°F and stay there long enough. Inboard and sterndrive blocks hold the most water and are the most vulnerable. Draining fully and adding antifreeze before the first hard freeze near Nov 21 is the protection.
Do outboards need winterizing?
Yes. An outboard should be drained so no water sits in the powerhead or lower unit, and the fuel system stabilized. Outboards self-drain better than inboards when tilted down, but fogging the cylinders and changing the gear oil are still part of a proper layup.
Fogging oil: is it necessary?
Fogging coats the cylinder walls and internal parts with a film that resists corrosion during months of storage. On engines that sit all winter it is cheap insurance against rust, especially in humid or coastal storage. Follow your engine maker's guidance on how to apply it.
How much does boat winterization cost?
A professional winterization varies with engine type and boat size, and inboards cost more than a simple outboard. Doing it yourself costs mainly antifreeze, oil, and fogging oil. Either way, the bill is far smaller than repairing a cracked block, which is the failure winterizing prevents.
Do boats in WA really need winterizing?
If temperatures reach freezing where the boat is stored, yes. Freeze claims are common in milder states precisely because owners assume they are safe and skip the step, then a rare cold snap cracks a block. Check the local freeze dates above and protect the engine before the first hard freeze.
When should I de-winterize my boat?
De-winterize in spring once the risk of a hard freeze has passed for your area. Reconnect and charge the battery, replace drain plugs, check hoses and clamps, and inspect the fuel system before the first launch. Reopening too early leaves the block exposed to a late cold snap.

Data: NOAA 1991–2020 normals via Everett, live outlook by Open-Meteo. Sources · Methodology. Last updated: July 11, 2026.